# How to setup including webgui? **URL:** \ **Category:** Help\ **Created:** [December 4, 2023, 10:30am UTC](https://community.netdata.cloud/t/how-to-setup-including-webgui/4932 "2023-12-04T10:30:07Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![madadmin](https://avatars.discourse-cdn.com/v4/letter/m/8baadc/32.png) [@madadmin](https://community.netdata.cloud/u/madadmin)\ **Post date:** [December 4, 2023, 10:30am UTC](https://community.netdata.cloud/t/how-to-setup-including-webgui/4932/1 "2023-12-04T10:30:07Z")
Hello! I tested netdata in a container and wanted to test it further in an Ubuntu22 vserver, but after the installation i have no webservices. I Tried the installation via integrations in the website and from the guide: > **[Install Netdata with kickstart.sh | Learn Netdata](https://learn.netdata.cloud/docs/installing/one-line-installer-for-all-linux-systems#optional-parameters-to-alter-your-installation)** > > The kickstart.sh script installs Netdata from source, including all dependencies required to connect to Netdata Cloud, with a single command. After the setup is finished there is no webservice configured and from the guide where the config of the webserver should be - there is nothing web realted in the config file. Do i have to install apache before i install the Software? I just want the same setup like in the Docker container version, because i want tho configure the monitoring Service locally- without the Netdata cloud. I used the nocloud flag in the installation. Thank you for every hint! ---
**Author:** ![Manolis\_Vasilakis](https://yyz1.discourse-cdn.com/flex029/user_avatar/community.netdata.cloud/manolis_vasilakis/32/820_2.png) [@Manolis\_Vasilakis](https://community.netdata.cloud/u/Manolis_Vasilakis)\ **Post date:** [December 5, 2023, 7:39am UTC](https://community.netdata.cloud/t/how-to-setup-including-webgui/4932/2 "2023-12-05T07:39:38Z")
Hi @madadmin You don’t need any web server software installed. Netdata contains it’s own web server component. Does reaching to http://ip\_of\_the\_node:19999 does not work? ---
**Author:** ![madadmin](https://avatars.discourse-cdn.com/v4/letter/m/8baadc/32.png) [@madadmin](https://community.netdata.cloud/u/madadmin)\ **Post date:** [December 5, 2023, 8:33am UTC](https://community.netdata.cloud/t/how-to-setup-including-webgui/4932/3 "2023-12-05T08:33:01Z")
> [@Manolis\_Vasilakis](#): > > 19999 Hi @Manolis_Vasilakis The firewall is disabled and in the netdata conf there is nothing related like mentioned in the webserver config guide: ![Screenshot 2023-12-05 091701](https://canada1.discourse-cdn.com/flex029/uploads/netdata2/original/2X/9/9efa3b184b1daa8b1cb22929287357caf82129c1.png) It seems that there are two services listening, but i cant tell if the IP local address port is correct- its for ipv4 0.0.0.0:19999 ![Screenshot 2023-12-05 092221](https://canada1.discourse-cdn.com/flex029/uploads/netdata2/original/2X/3/38267eb7b78f727b16ecd2a473ab968d1848915b.png) Im evaluating too if there could be an issue with internal firewall related restrictions. ---
**Author:** ![madadmin](https://avatars.discourse-cdn.com/v4/letter/m/8baadc/32.png) [@madadmin](https://community.netdata.cloud/u/madadmin)\ **Post date:** [December 5, 2023, 8:59am UTC](https://community.netdata.cloud/t/how-to-setup-including-webgui/4932/4 "2023-12-05T08:59:12Z")
Hi @Manolis_Vasilakis, we had internal increase in restrictions so its a home made issue. I can reach the webgui now. Thank you for your help! But i still find confusing, that there is no `[web]` section in my netdata conf. Dit it move after a certain version and the guide is a bit out of date? Tank you! ---
**Author:** ![Manolis\_Vasilakis](https://yyz1.discourse-cdn.com/flex029/user_avatar/community.netdata.cloud/manolis_vasilakis/32/820_2.png) [@Manolis\_Vasilakis](https://community.netdata.cloud/u/Manolis_Vasilakis)\ **Post date:** [December 5, 2023, 9:08am UTC](https://community.netdata.cloud/t/how-to-setup-including-webgui/4932/5 "2023-12-05T09:08:42Z")
Hi @madadmin All right, thanks for the update. It is normal for your stock netdata.conf to look like this after a fresh install. Netdata maintains internally a full netdata.conf file, and you can replace the one you have using the curl or wget method.